- Jue Ene 15, 2004 13:14
#377743
Buenas,
¿os parece que vayamos poniendo aquí esas piezas especiales para GG que encontremos?
Lo curioso es que fuera de España hay multitud de accesorios y piezas especiales para la GG, y en España apenas hay nada, quitando lo original y las tipicas cosas de la industria auxiliar
En la web http://www.smackovermotorsports.com/ hay muchas de estas piezas especiales, algunas muy curiosas:
EFM No-Stall Auto Clutch
No Stalling, Reduce fatigue and arm pump, improved traction with the EFM no-stall auto clutch. Available for most late model dirt bikes and quads (including gasgas!).
A billet clutch basket is supplied so you can switch back to a conventional clutch if desired.
Billet clutch basket, pressure plate and side case bolts included. Smackover Price : $630.00
LTR Power Valve Cover
High Volume Power Valve Cover
The design of this cover increases the volume of the power valve chamber, lending itself to better throttle response and low to mid range performance. CNC machined from T6 aluminum alloy billet to exact specifications to insure a perfect fit. Our design also incorporates a drain to reduce oil accumulation within the chamber, allowing for consistent volume capacity. $89.00
LTR Alloy Coolant Impeller
Alloy coolant impellers (shown on left) are now available through LT-Racing. The impellers feature improved coolant flow and durability over the stock plastic impeller. The LT-Racing Alloy impeller will prevent overheating and will not come apart or deform when the going gets tough, failures of the stock plastic impeller under severe conditions have been common and have caused expensive damage to the engine. Used and endorsed by the GNCC GasGas Motors of America Team.$59.00
LTR Billet Exhaust Spigot
In previous years, gasgas used a durable steel exhaust spigot, on late model gasgas enduro 2 strokes this part is now cast aluminum and breaks often on the trail (with a heavy duty pipe or pipe guard there is no “give” and it will snap often during a fall).
This high quality steel billet component from LTR may save you a day of riding or that first place finish...$64.00
LTR Pull Rods
High quality linkage rods are now available in 120mm, 124mm and 126mm lengths (stock is 122mm for '01 models). CNC machined from 7075 T6 billet aluminum, they are stronger than the stock link. They lower the bike, soften the initial action of the rear shock, and improve high speed stability.
The 124mm links lower the rear of the machine by .400" (10.16 mm). The 126mm links lower the rear end of the machine .800" (20.32 mm).
$79.00/pair
Clutch Slave Cylinder
Flatland Racing Slave Cylinder Guard $31.00
Clutch Slave Cylinder/Case Saver
LTR Case Saver/Clutch Slave Cylinder Guard $47.00
¿os parece que vayamos poniendo aquí esas piezas especiales para GG que encontremos?
Lo curioso es que fuera de España hay multitud de accesorios y piezas especiales para la GG, y en España apenas hay nada, quitando lo original y las tipicas cosas de la industria auxiliar
En la web http://www.smackovermotorsports.com/ hay muchas de estas piezas especiales, algunas muy curiosas:
EFM No-Stall Auto Clutch
No Stalling, Reduce fatigue and arm pump, improved traction with the EFM no-stall auto clutch. Available for most late model dirt bikes and quads (including gasgas!).
A billet clutch basket is supplied so you can switch back to a conventional clutch if desired.
Billet clutch basket, pressure plate and side case bolts included. Smackover Price : $630.00
LTR Power Valve Cover
High Volume Power Valve Cover
The design of this cover increases the volume of the power valve chamber, lending itself to better throttle response and low to mid range performance. CNC machined from T6 aluminum alloy billet to exact specifications to insure a perfect fit. Our design also incorporates a drain to reduce oil accumulation within the chamber, allowing for consistent volume capacity. $89.00
LTR Alloy Coolant Impeller
Alloy coolant impellers (shown on left) are now available through LT-Racing. The impellers feature improved coolant flow and durability over the stock plastic impeller. The LT-Racing Alloy impeller will prevent overheating and will not come apart or deform when the going gets tough, failures of the stock plastic impeller under severe conditions have been common and have caused expensive damage to the engine. Used and endorsed by the GNCC GasGas Motors of America Team.$59.00
LTR Billet Exhaust Spigot
In previous years, gasgas used a durable steel exhaust spigot, on late model gasgas enduro 2 strokes this part is now cast aluminum and breaks often on the trail (with a heavy duty pipe or pipe guard there is no “give” and it will snap often during a fall).
This high quality steel billet component from LTR may save you a day of riding or that first place finish...$64.00
LTR Pull Rods
High quality linkage rods are now available in 120mm, 124mm and 126mm lengths (stock is 122mm for '01 models). CNC machined from 7075 T6 billet aluminum, they are stronger than the stock link. They lower the bike, soften the initial action of the rear shock, and improve high speed stability.
The 124mm links lower the rear of the machine by .400" (10.16 mm). The 126mm links lower the rear end of the machine .800" (20.32 mm).
$79.00/pair
Clutch Slave Cylinder
Flatland Racing Slave Cylinder Guard $31.00
Clutch Slave Cylinder/Case Saver
LTR Case Saver/Clutch Slave Cylinder Guard $47.00
Sigo haciendo TODO TERRENO, a pesar del Gobierno
. Gracias!
